Daylight Punch Accessories
19 August 2010
Description
When the Daylight Punch fixture is hot, the color filter sticks to the front cover, and in some cases the front cover distorts.
Cause
The elevated intensity of energy that is transferred from the white LEDs of the Daylight Punch and absorbed and/or trapped in the color filter can cause the partial distortion/warping/sticking of the color filters when attached directly or placed at a very close proximity to the front cover.
Correction Path
It is recommended that a minimum space of 1” must be maintained between the front plastic cover and the color filter to ensure proper airflow.
Affected Units
S/N 0306039701 - present
Note: While all due care has been taken in the preparation of this document, Chroma-Q shall not be liable for any inaccuracies or omissions which may occur herein.